# Connect Lift & Learn to a device and configure device settings

> Link your Lift & Learn installation to a physical display device and configure it for in-store deployment.

## How to connect Lift & Learn to a device

Lift & Learn needs to be connected to the same physical device that is connected to the screen and to the Nexmosphere sensor. Do this step before further configuring the installation, in order to be able to select the Nexmosphere sensor as a peripheral in the app settings.

Use these guides to connect your Lift & Learn installation to a device:

- [Connect a new device to an installation](https://learn.phystack.com/installations/connect-a-new-device-to-an-installation/)

## How to configure device settings

1. Navigate to **Operations → Devices**
2. Find your device and select it
3. Go to the device's **Settings** tab
4. Set the proper **timezone** for the device
5. Set the **daily reboot time**
6. Adjust **screen settings**, such as screen orientation
7. Enable **device monitoring** so you can set up and receive [device alerts](https://learn.phystack.com/alerts/create-a-new-device-alert/)